Clamp SL-HHPR3
The press is intended for small workshops for a small quantity. It is also intended for edge gluing and lamination of wooden stock whose joints are dried naturally. It is very simple to maintain and operate.
Pressing is carried out by hydraulic cylinders. The bottom stop is fixed and in one piece. The aligning units are driven manually from the working areas on each side of the press prior to the loading of workpieces. Each aligning unit has 1 hydraulic cylinder. These cylinders allow a force of 1.4N per each aligning unit. The running rail is extended on one side of the press, so the unit can be moved. Steering is done by manual hydraulic valves.
Technical specifications
| Specification | Value |
|---|---|
| Operating length | 2500 – 4000 mm |
| Operating height | 800 – 1250 mm |
| Operating thickness | 25 – 100 mm |
| Number of working side | 3 |
| Number of hydraulic cylinders per side | 5 – 8 |
| Specific pressure | 4,5 – 7 kg/cm² |
| Number of aligning units per side | 2 – 4 |
| Parking place for aligning units on one side |